SITE CONTENTS
LOCATION MAP
MEASURED DRAWINGS
TEACHER'S CORNER
ARCHITECTURAL
INFORMATION
DESIGN TEAM
HOME
|
|
Create a three-dimensional building model replica of the Bastion in Nanaimo B.C. based on the traditional historical Hudson Bay architectural style. |
|
Follow instructions precisely as indicated. |
SUPPLIES
|
INSTRUCTIONS:
- Begin by printing all three pages on regular or thick paper.
- Proceed to cut out parts in order starting with page 1 and fold lines and tabs down.
- Then glue parts together to create a three-dimensional model.
Part 1 - Upper half of main structure.
- Cut out parts 1A and 1B.
- Fold all tabs down except tabs 1E fold up.
- *Note - All the sides in this cut out must be equal.
- One way to do this is to fold each part in half end to end creating a mid-point.
- Then take each end and line up with mid-point fold thus creating two other mid-point folds.
- The end result is an equal-sided octagon shape.
- Repeat this procedure with remaining parts.
- Now put together top part with tabs 1A and 1B.
- Continue by gluing tabs 1C to angled sides that will complete part 1.
Page 2 - Lower half of main structure.
- Cut out parts 2A and 2B
- Follow instructions at *Note
- Put together lower half with tabs 2A and 2B.
- Glue upper and lower halves together with tabs 1E, making sure to line up the side of lower half with door.
Page 3 - Roof
- Cut out parts 3A and 3B
- Follow instructions above at *Note
- Assemble roof together with tabs 3A and 3B.
- Then glue roof to main structure with tabs 1R.
Now It's your turn. Go to it!
|
|
|
|
|
|